Three-D tree decoration

This project is entirely built with scrap material, 3.3 mm (1/8″) MDF board and the idea was to stay at home and build at home, without going to a shop. So I used what I had on hand.

I cut all 3 pieces using my jigsaw and filed down the edges with my mini files. I put the assembly together with a bit of contact adhesive, and just in case I used clamps to hold them tight for a minute or two.

The decoration is exactly the same size as the frame and stays in place by itself, but I used some hot glue to make sure it’ll stay like this for good.

I’m very happy with how this project turned out, quick and simple and almost completely at no cost. I’m also very proud that I’m so resourceful and managed everything without going to a shop. I call this decoration 3D because of the shadow it casts and that little branch that goes in between the little trees.

Leave a Reply